LED Controller MIBOXER 2 in 1 DIM+CCT 12A Model No. E2-ZR ZIGBEE 3.0+2.4G (RC12)

MiBoxer E2-ZR — universal LED strip controller combining Zigbee 3.0 and 2.4 GHz RF (MiBoxer remotes).
The device supports two operating modes:

• DIM — for single-color LED strips
• CCT — for adjustable color temperature (WW+CW)

The controller integrates easily into smart home systems via a Zigbee gateway (Tuya, Smart Life, Alexa, Google Home, etc.) and also allows local control via MiBoxer remote or wall panel. Maximum load — 12A at 12–24V DC (up to 288W). Ideal solution for smart lighting in homes, offices, or commercial projects.

Application:

Lighting systems based on LED sources with remote control of brightness, color, and color temperature. Perfect for smart lighting in residential, office, and commercial spaces.

Advantages:

• Stable performance
• Support for Zigbee 3.0 and 2.4 GHz RF simultaneously
• Compatible with MiBoxer remotes and panels
• Two operating modes: DIM/CCT
• Voice control support (via gateway)
• High load capacity — up to 288W (at 24V)
• Compact housing and convenient screwless terminals

Technical specifications:

• Model: MiBoxer E2-ZR
• Input voltage: DC 12–24V
• Max current: 12A (total)
• Max power: up to 288W (24V)
• Modes: DIM (single-color), CCT (WW/CW)
• Interfaces: Zigbee 3.0, RF 2.4 GHz
• Compatibility: Tuya, Smart Life, Alexa, Google Home, MiBoxer remotes and panels
• RF range: up to 30 m
• Zigbee range: up to 100 m (open area)

How it works:

Power & LED strip connection: supply DC 12–24V via terminals or DC 5.5×2.1 jack, connect LED strip via common anode (V+) and one channel (single-color) or two channels (WW/CW for CCT). Max load — 12A in total. At 24V this equals 288W, at 12V — 144W.

Add to Zigbee gateway: works with Tuya/Smart Life and other standard hubs (e.g., Echo with Zigbee). After pairing, control via app, scenes, timers, and voice (Alexa/Google). Zigbee range up to 100 m (open).

Local RF control: pair with MiBoxer RF remote/panel (FUT006/007, B-series, T-series, etc.) for direct brightness and CCT control. RF range up to 30 m. Controllers can retransmit RF signals for synchronized group operation.

Mode switching:

SET button on housing: toggles DIM ↔ CCT. PWM frequency can also be adjusted (high 16 kHz / low 250 Hz).

Basic setup steps:

• Connect power: 12–24V DC → E2-ZR, then connect LED strip (V+ and CH1 for single-color, or V+/WW/CW for CCT). Do not exceed 12A total.
• Select mode: press SET (DIM or CCT).
• Pair with Zigbee gateway: put controller in pairing mode (LED blinks — see manual), add device in Tuya/Smart Life app.
• Pair RF remote (optional): follow manual procedure (usually power cycle + ON/OFF button sequence).

Useful tips:

• For CCT strips, add up WW+CW channel currents to stay within 12A. At 24V this is usually safer (lower current).
• If you need both app and remote: use Zigbee for automation/scenes and RF for instant local control (no phone/Internet required).
• For larger installations, use multiple controllers and enable RF signal retransmission for synchronized zones.