Laser Sensor for LED Lighting (EL7376)

The EL7376 is a compact embedded laser sensor designed for automatic control of LED lighting. It detects the presence of people or objects within a defined zone and sends a control signal to the lighting controller. Ideal for illuminating staircases, corridors, furniture, walkways, niches, and other areas requiring automatic light activation.

The main advantage of this laser sensor is its precise detection zone. Unlike standard motion sensors, it allows you to adjust the trigger distance from 5 cm up to 2.5 m—perfect for narrow passages, near staircases, cabinets, and similar spaces. The detection angle is approximately ±10°.

It features adjustable off-delay settings: 2/5/10/30/60 seconds. Once a person enters the zone, lighting turns on; when they leave, it switches off after the selected delay.

Key Specifications:

• Type: Laser motion sensor
• Connection: 3-wire
• Sensor power supply: 5V DC
• Detection range: 0.05–2.5 m
• Detection angle: ±10°
• Off-delay options: 2/5/10/30/60 sec
• Output signal: High/Low level
• Cable length: 120 cm
• Faceplate diameter: Ø32 mm
• Height: 17.5 mm
• Housing mounting diameter: approx. 24 mm
• Installation type: Embedded
• Protection rating: IP20
• Color: White

The sensor is designed to work with a compatible LED lighting controller; the LED strip must not be connected directly to the sensor. Check manufacturer compatibility lists, including support for Usmart Sensor UE1-L and other Usmart system devices.

Applications: Staircase lighting, corridors, walkways, furniture under-cabinet lighting, wardrobes, kitchens, dressing rooms, niches, and similar spaces.

Embedded laser sensor for automatic LED lighting control. Adjustable detection range 5–250 cm, ±10° angle, five off-delay options 2/5/10/30/60 sec. Powered by 5V DC with a 120 cm cable. Ideal for stairs, corridors, furniture, and pass-through zones.

Important! Before installation, we recommend performing a test connection of the entire system.

Pay attention to contact markings during wiring.

Ensure your power supply and controller capacity exceed the total load by at least 20–30%.