The 3D in‑set panel for GX53 light fixtures creates the effect of a recessed fixture in a stretched ceiling. The platform allows the light source to be positioned exactly at the level of the stretched ceiling, giving it an outstanding aesthetic appearance.
This model of in‑set part works with GX53 light sources. Light sources that are ideal for this solution:
- LEDURO GX53 7W 3000K – https://www.skyshop.ee/ru/product/led-lampa-gx53-7w-3000k-ll27/
- LEDURO GX53 7W 4000K – https://www.skyshop.ee/ru/product/led-lampa-gx53-leduro-7w-4000k-600-lumen-ll43/
Installation:
The in‑set part is installed before stretching the stretched‑ceiling fabric onto a perforated mounting tape to level the platform against any sag of the fabric. If the fabric has no sag, the part can be fixed rigidly on metal angles and placed directly at the same level as the fabric. After stretching the fabric, a ring (included in the kit) is glued with cyanoacrylate adhesive. A hole is cut into the inner side of the ring; the inner part of the platform (the “glass”) is inserted into the ring and fastened to the main in‑set part with screws. While tightening the glass to the main part, the stretched‑ceiling material is continuously heated with a hair dryer. Then the light source – a GX53 lamp or LED module – is installed into the platform and secured with a locking ring.

























